Termination Kits | Low Voltage 4Core

If you're looking for low-voltage termination kits for 4-core cables, these kits typically include components needed to properly terminate and seal multi-core cables (often used in power, control, or instrumentation applications). Below are some common options and considerations:







Types of Low-Voltage (LV) 4-Core Termination Kits




  1. Heat-Shrink Termination Kits





    • Include heat-shrink tubes, adhesive-lined sleeves, phase markers, and sealing mastics.




    • Suitable for 600/1000V cables (e.g., XLPE or PVC insulated).




    • Example: 3M QT-III Kit or TE Connectivity Raychem.






  2. Cold-Shrink Kits





    • Pre-expanded rubber tubes that shrink without heat (ideal for hazardous areas).




    • Example: Prysmian Cold Shrink Kit or ABB Cold Shrink.






  3. Resin-Based Kits





    • Use epoxy resin for moisture/chemical resistance (common in underground or wet environments).






  4. Modular Plug Systems (for control/signal cables)





    • Include cable glands, connectors, and strain relief (e.g., Phoenix Contact, LAPP).










Key Features to Check




  • Voltage Rating: Typically 0.6/1kV (confirm based on your cable specs).




  • Cable Size Range: E.g., 4x1.5mm² to 4x240mm² (match your conductor size).




  • IP Rating: IP68 for waterproof applications.




  • Standards Compliance: IEC 60502, VDE, UL.








Popular Brands & Examples






































Brand Example Product Core Count Voltage Rating
3M Scotchcast 2134 4-core Up to 1kV
Prysmian JIC-4C 4-core 600/1000V
TE Raychem RAYKIT-4 4-core LV (0.6/1kV)
HellermannTyton HSTT4 4-core 1kV






Where to Buy?




  • Electrical Suppliers: RS Components, Farnell, Grainger.




  • Online: Amazon, eBay (ensure compatibility).




  • Direct from Manufacturers: 3M, Prysmian, Nexans.








Installation Tips




  1. Strip & Prep Cables – Clean conductors and remove sharp edges.




  2. Slide Components – Follow kit instructions (order matters!).




  3. Shrink/Seal – Use a heat gun for heat-shrink kits.




  4. Test – Check insulation resistance post-installation.https://store.unigulfsupply.com/product/termination-kits-low-voltage-4-core/



Leave a Reply

Your email address will not be published. Required fields are marked *